A textile engineer can work in several different areas. Some focus on materials: developing fabrics and knits. Others, like Benoît, work on the finished product. Their job is to take an idea and ensure it can be manufactured on an industrial scale.
His training has given him valuable instincts: knowing what can be manufactured, what assembles easily, and, above all, what will hold up well or require more attention to quality. That’s what saves time during the development process.
The vests Benoît worked on are mechanical airbags, worn over a jacket, whether riding a motorcycle or horseback. A strap connects the vest to the motorcycle or the saddle. When the rider is thrown off the vehicle, the strap detaches. It then acts as a pull pin: the gas from the pressurized cartridges is released and inflates the vest. It’s the same principle as the lanyard on a jet ski that cuts the engine when the rider falls.
In these products, the fabric envelops a highly technical core. It must be strong enough to protect without restricting the user too much, which requires striking a balance. It was also a period of research and development, with a constant interplay between mechanical components and textiles.
After nearly ten years working on a single type of product, Benoît wanted to explore something new. Working at a product development and design agency, and later on assignment for an international sporting goods retail group, he gained experience with a wide variety of products: parasols, umbrellas, rain covers for children riding on the back of long-tail bikes, and precision sports equipment.
He joined Ekkiden two and a half years ago, marking his first experience in consulting. His assignment led him to work with about ten teams across different offices.
“Working with about ten teams across different offices was fun because you meet so many people, and you see the differences in how each team works.”
This requires good organization, to be on site and to manage samples. Decisions are sometimes made the very same morning.
He specializes in “heavy-duty sewing”, meaning textile products other than clothing. This requires large machines, large needles, and thick thread, because once the material exceeds a certain thickness, standard home sewing machines can’t handle it.
“If I had to choose between developing a backpack or a jacket, I’d go with the backpack.”
For a young engineer wondering what the job entails, here’s what Benoît uses and what drives the development process:
Adobe Illustrator for the technical file. This 2D design document provides an overview of the product, including the colors of each component, the materials, the dimensions, and the details of each seam. It’s intended for the manufacturer, sometimes on the other side of the world and must leave as little room for interpretation as possible. “When you’re working with a manufacturer on the other side of the world, you have to specify what size the product should be, what the colors are, and what materials are used.”
This is a subject close to his heart. At the agency where he worked, Benoît collaborated with a young startup in Lille that collected end-of-life products, such as kayaks, and downgraded fabrics. Among them were fabrics intended for inflatable boats but rejected because of a defect. These were then used to make bicycle bags.
The difference from recycling is simple. Recycling grinds up the material to make something new. Upcycling directly reuses the fabric, cut into large panels to make new products. Benoît compares this to the return deposit system for glass bottles: rather than breaking them and remelting them, we reuse them as is.
“We skip a step that uses energy for very little, since we already have a fabric that can be used.”
The project lasted about two years and resulted in three products: a saddle bag, a handlebar bag, and a frame bag. For a product engineer, this presented three very concrete challenges:
“The biggest challenge was securing a steady supply of materials.”
Upcycling also has its limits. An old tent canvas that’s been used for ten years is already weakened. And for protective products, such as airbags, reusing existing material is much more complicated.
“You have to be good at communication because the product manager is the conductor of the project team.”
“We have the theory here, and in the factories, they have the practical experience. The two don’t necessarily align in the same way.”